NSTM motors are available in three versions: NSTM 50, NSTM 100 and NSTM 100 HW. The numbers indicate the stator diameter, which is 50 mm in the case of NSTM 50 and 100 mm in the case of NSTM 100. NSTM 100 HW is a hollow shaft motor available with 42 mm inside diameter. With this version, cables and tubes can be looped through the motor’s interior.

As NSTM motors are not mass produced but always tailor-made on customer’s demand, they can also be designed as a machine component. By this you benefit from extremely compact drive units.

Motor type	Stalled torque	Stalled current	Rated speed	Further information in PDF format
	Nm	A	rpm
NSTM				Data sheet
NSTM50   1-A9   2-A9   3-A7.5   4-A7   5-A7   6-A7	1.12 2.07 2.96 3.69 4.59 5.40	0.41 0.75 0.75 0.88 1.11 1.30	900 900 750 700 700 700	Drawing
NSTM100        1-A2   2-A2   3-A2   4-A2   1-A6   2-A6   3-A6   3-B2   4-B2   5-B2   6-B2   7-B2   8-B2   1-B6   2-B6   3-B6   4-B6   5-B6   6-B6   7-B6   8-B6	6.32 11.00 16.10 19.80 5.06 8.73 12.50 15.70 19.80 24.20 28.60 31.00 35.30 5.00 9.20 12.30 16.30 19.00 21.80 24.80 29.10	0.81 1.44 2.07 2.51 1.95 3.51 5.00 1.17 1.49 1.79 2.09 2.37 2.66 1.12 2.02 2.82 3.57 4.30 5.00 5.70 6.38	200 200 200 200 600 600 600 200 200 200 200 200 200 600 600 600 600 600 600 600 600	Drawing
NSTM100HW				Drawing
NSTM180        1-B2   2-B2   3-B2   4-B2   5-B2   6-B2	56.00 103.00 148.00 192.00 235.00 278.00	2.40 4.10 5.70 7.30 8.80 10.60	200 200 200 200 200 200	Drawing

here

For further information, write us an , fill in our Contact form or call us on the phone under 0049-7141-29690. We look forward to offering you consultation!

High-torque servo motor NSTM and ND42 servo converter in the compact case

High Torque-Servomotor NSTM